News

Type Of Interlining



Large categories are divided into non-woven and woven, and garment linings are generally classified into non-woven and woven.

1. Non-woven, as the name implies, is a cloth that has not been formed by weaving.

Process principle: The chemical fiber is coated with a high temperature and high pressure to form a base fabric. Then, a layer of hot melt adhesive is applied to the surface of the base fabric through a coating machine, and then dried to form the nonwoven interlining used.

How to use: Place the glued side of the lining on the fabric, then use a bonding machine or iron to heat the glue on the lining to achieve the effect of bonding to the fabric.

Features: cheap, soft to the touch, but not washable.

2. There is spinning, the commonly used equipment is a key loom and a water jet loom, and the polyester is made into a base fabric by textile. It is characterized by strong pulling force and good elasticity.

Regarding the rubber of the lining cloth, the powder used in the market is usually dusting glue, which is characterized by large amount of glue and simple production process. The disadvantage is that the amount of glue is large, and the phenomenon of penetration is easy to occur. It has now been eliminated.

The most advanced is the two-point process without foundation, which is characterized by easy control of the amount of glue, strong adhesion, washing resistance and other special treatments. It is now used by most manufacturers.